Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE-p2 #6: Sat Jul 12 23:54:04 MSD 2008
    pattern@toshiba:/usr/obj/usr/src/sys/TOSHIBA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-58 (1895.55-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60f81  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  Cores per package: 2
real memory  = 2145845248 (2046 MB)
avail memory = 2090303488 (1993 MB)
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
hptrr: HPT RocketRAID controller driver v1.1 (Jul 12 2008 23:53:43)
acpi0: <TOSCPL TOSCPL00> on motherboard
ACPI Error (evregion-0427): No handler for Region [ERAM] (0xc562c680) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20070320]

**** Exception AE_NOT_EXIST during execution of method [\_SB_.HTEV] (Node 0xc5227680)

Method Execution Stack:
    Method [HTEV] executing: \_SB.PCI0.LPC0.EC0.GHID
    Method [_REG] executing: Call to method [\_SB_.HTEV] (Node 0xc5227680)

Local Variables for method [HTEV]:
    Local0: 0 <Null Object>
    Local1: 0 <Null Object>
    Local2: 0 <Null Object>
    Local3: 0 <Null Object>
    Local4: 0 <Null Object>
    Local5: 0 <Null Object>
    Local6: 0 <Null Object>
    Local7: 0 <Null Object>

Arguments for Method [HTEV]: (1 arguments defined, max concurrency = 0)
    Arg0:   0xc52432c0 <Obj>            Integer        0       2
    Arg1:   0 <Null Object>
    Arg2:   0 <Null Object>
    Arg3:   0 <Null Object>
    Arg4:   0 <Null Object>
    Arg5:   0 <Null Object>
    Arg6:   0 <Null Object>

ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.HTEV] (Node 0xc5227680), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node 0xc5230c40), AE_NOT_EXIST
acpi0: Could not initialise SystemIO handler: AE_NOT_EXIST
device_attach: acpi0 attach returned 6
cpu0 on motherboard
powernow0: <PowerNow! K8> on cpu0
cpu1 on motherboard
powernow1: <PowerNow! K8> on cpu1
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xd0000000-0xdfffffff,0xcfef0000-0xcfefffff irq 3 at device 0.0 on pci1
pcm0: <ATI (Unknown) High Definition Audio Controller> mem 0xcfeec000-0xcfeeffff irq 11 at device 0.1 on pci1
pcm0: [ITHREAD]
pcib2: <PCI-PCI bridge> at device 5.0 on pci0
pci8: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 6.0 on pci0
pci14: <PCI bus> on pcib3
re0: <RealTek 8101E PCIe 10/100baseTX> port 0xa000-0xa0ff mem 0xcf8ff000-0xcf8fffff irq 3 at device 0.0 on pci14
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: Ethernet address: 00:1b:38:48:cb:df
re0: [FILTER]
re0: [FILTER]
pcib4: <PCI-PCI bridge> at device 7.0 on pci0
pci20: <PCI bus> on pcib4
ath0: <Atheros 5424/2424> mem 0xcfcf0000-0xcfcfffff irq 11 at device 0.0 on pci20
ath0: [ITHREAD]
ath0: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:1b:9e:5f:97:fe
ath0: mac 14.2 phy 7.0 radio 10.2
atapci0: <ATI ATA controller> port 0x8440-0x8447,0x8434-0x8437,0x8438-0x843f,0x8430-0x8433,0x8400-0x840f mem 0xcf5f6c00-0xcf5f6fff irq 11 at device 18.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xcf5fb000-0xcf5fbfff irq 10 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xcf5fa000-0xcf5fafff irq 5 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xcf5f9000-0xcf5f9fff irq 3 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xcf5f8000-0xcf5f8fff irq 5 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xcf5f7000-0xcf5f7fff irq 3 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcf5f6800-0xcf5f68ff irq 11 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: waiting for BIOS to give up control
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
ugen0: <Chicony Electronics Co., Ltd. Chicony USB 2.0 Camera, class 239/2, rev 2.00/3.35, addr 2> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pcm1: <ATI SB600 High Definition Audio Controller> mem 0xcf5fc000-0xcf5fffff irq 10 at device 20.2 on pci0
pcm1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <PCI-PCI bridge> at device 20.4 on pci0
pci26: <PCI bus> on pcib5
cbb0: <PCI-CardBus Bridge> mem 0xcfafb000-0xcfafbfff irq 11 at device 4.0 on pci26
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fwohci0: <1394 Open Host Controller Interface> mem 0xcfaf9800-0xcfaf9fff,0xcfafc000-0xcfafffff irq 11 at device 4.1 on pci26
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:79:c0:40:4f:db
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d908000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:40:4f:db
fwe0: Ethernet address: 02:02:3f:40:4f:db
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:3f:79:c0:40:4f:db @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci26: <mass storage> at device 4.2 (no driver attached)
pci26: <base peripheral> at device 4.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcf800-0xd07ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0100> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
ugen1: <vendor 0x0930 product 0x0508, class 224/1, rev 2.00/19.15, addr 2> on uhub2>
Timecounters tick every 1.000 msec
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <HL-DT-ST DVDRAM GSA-T20N/WT03> at ata0-master UDMA33
pcm0: <HDA Codec: Unknown Codec>
pcm0: <HDA Driver Revision: 20071129_0050>
pcm1: <HDA Codec: Realtek ALC268>
pcm1: <HDA Driver Revision: 20071129_0050>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s3a

Manual root filesystem specification:
  <fstype>:<device> Mount <device> using filesystem <fstype>
                      eg. ufs:da0s1a
  ?                 List valid disk boot devices
  <empty line>      Abort manual input

mountroot>